Janome 9400 Foot Pedal or Not

You may not get very excited about the foot pedals on your sewing machine, but I certainly did when I discovered that the Janome Horizon Memory Craft 9400 QCP had not one, but two foot pedals!

You may wonder why a sewing machine would have or need more than one foot pedal. After all, doesn't it just start and stop the machine? Well, yes and no. The Janome 9400 has a very large foot pedal, which is the one that stops and starts the machine, but it also has a little foot pedal that has another function: to cut the thread. Yes, now you can cut the thread with your foot! 

While the discovery that I could use the small foot pedal to cut my thread was very exciting for me, there was more! Both foot pedals can be attached to a base which has non-skid dots on the bottom so it won't slide around on the floor. Brilliant! 

In addition to using the foot pedals, there is another way to start and stop the Janome 9400 and to cut the thread. Learn about these features by watching the video below or on my YouTube channel.

Would you prefer to stitch with your feet or use your hands to control your sewing machine. Leave a comment below to let me know which you prefer and when you might find one or the other of these options the most helpful.


Kim's signature small.jpg